The Clamp III links and locks ball-joints of an arm body, direct base or adapter each other. Ball-joint receptacles are machined lightweight aluminum alloy to satisfy highly precise and durable requirement. The handle is designed to naturally fit to fingers and made by resin casting to enhance its operability to clamp ball-joints firmly with less power and easy to loosen to adjust relative angle o..
The D-2000 offers highly accurate S-TTL Auto mode by transmitting built-in flash light to an external strobe regardless of make or model of camera. The S-TTL Auto does not require any complicated setting. You do not have to buy new strobe when you upgrade from point & shoot digital camera to digital SLR camera.
The D-2000 offers semi-automatic 24 step External Auto mode with 1/4EV. increments..
INON -0.5 Blue Diffuser 2 (External Auto)
Item includes threaded W40 LE and Red LE filters for the focus light. 0.5 blue diffuser panel for External Auto Mode compatible strobes: Z-240, D-2000Wn, D-2000W, D-2000, D-180, D-180S when used with Canon digital cameras.
Diffuser corrects for camera's reddish-yellow hue, rendering more natural colors.
Includes Focus Light Filter Set (Blue/Red)..
Adding these filters on strobe enables to reduce color temperature of strobe light. Two different grade filters deliver strobe light at color temperature 4900K or 4600K from original 5500K and each grade filter has non-diffuse version at same power output and half stop diffused version which increases beam angle to 110 degree. These filters have been designed on totally new concept to control colo..
Inon -0.5 white diffuser:
This diffuser is standard with all Inon S2000 strobes. So please only buy this if you need to replace it.
Softens the strobe light by a tiny -0.5 stops.
Increases angle of coverage to 110 x 110 degrees with this strobes.
Includes: 1 x white -0.5 diffuser, English instructions.
Is suitable for use with the following Inon strobes:
The Direct Base III is a fundamental part to attach arm system. Directly attached on the Grip Base D4/Grip Base M1/D Holder or via optional M6 Plate Direct Base III or M5 Plate Direct Base III on a housing or other base products. It is also possible to attach the Direct Base III on the middle of the Stick Arm or Multi Ball Arm via optional M6 Joint. The Direct Base III is attached on a strobe as w..