Sea & Sea Housing for SONY α – series
COMPATIBLE WITH α 6500, α 6300 and α6000.
MDX-α6300 Orange - 06185A
[ MDX - Housing ]
[Construction] Body: corrosion-resistant aluminum alloy (machined)
[Depth rating] 75m / 250ft
[Dimensions (WxHxD)] 195 x 125 x 100 mm / 7.7 x 4.9 x 3.9 inches
[Weight] Approx.1,265 g / 44.7 oz (Housing only)
Improved underwater weight. The underwater weight has been improved by redesigning key components and precision machining.
Two ergonomic thumb rests available on the rear case. The two ergonomic thumb rests may be used to securely grip the housing.
The housing offers two accessory bulkheads:
-One port may be used with the optional N-type (two pin) strobe connector.
-The other port may be used with the optional Leak Sensor (vacuum system).
-The 5-pin Sync Cord/N may be used when connecting a strobe electronically
to the housing, allowing for accurate rapid strobe firing.
LCD Monitor Hood with Lens can be fitted
The hood reduces reflections and provides a clear and complete view of the cameras LCD screen.
All camera functions can be used underwater.
Equipped with two Fiber-Optic Cable sockets.
Equipped with a lens release button.
Port lock may be activated from outside of the housing.
High-performance luminescent buttons. Controls will glow in low light conditions.
The camera's built-in flash can be activated and deactivated from the housing using the Built-in flash activation button and the Flash disablement lever.
Optional Leak Sensor can be built into the housing. Its LED lamp is located in the LCD monitor window.
Use of the hand-strap is recommended when a camera tray (stay) is not used. The hand strap helps you hold the housing with just one hand.
Equipped with two sacrificial zinc diodes (one on the front case and the second on the rear) to avoid electrolysis damage.