Construction Body: corrosion-resistant aluminum alloy (machined)
Depth rating 75m / 250ft
Dimensions (WxHxD) 195 x 125 x 100 mm / 7.7 x 4.9 x 3.9 inches
Weight Approx.1,265 g / 44.7 oz (Housing only)
Included in the box:
- A6300 Housing (no ports included)
- ML Hand strap
- Leak Sensor
- LCD Monitor hood with lens
- Ball mounts, tray and grips
Compatible with both the Sony a6300 and the Sony a6000 replacing accessory rubber caps.
Improved underwater weight.The weight of the MDX-a6300 is roughly the same as the MDX-a6000.
However, the underwater weight has been improved by redesigning key components and precision machining.
ML Hand Strap can be fitted. The ML Hand Strap is recommended
when a tray and grip are not used.The ML Hand Strap allows you to
securely grip the housing with one hand.
The housing offers two accessory ports.
One port may be used with the optional N-type (two pin) strobe connector.
The other port may be used with the optional Leak Sentinel (vacuum system).
The 5-pin Sync Cord/N may be used when connecting a strobe (such as YS-D2)
to the housing, allowing for accurate rapid strobe firing.
LCD Monitor Hood with Lens can be fitted
The hood reduces reflections and provides a clear and complete view of the cameras LCD screen.
All camera functions can be used underwater.
Equipped with two Fiber-Optic Cable sockets.
Equipped with a lens release button.
Port lock may be activated from outside of the housing.
High-performance luminescent buttons. Controls will glow in low light conditions.
The camera's built-in flash can be activated and deactivated from the housing using the Built-in flash activation button and the Flash disablement lever.
Optional Leak Sensor can be built into the housing. Its LED lamp is located in the LCD monitor window.
Use of the hand-strap is recommended when a camera tray (stay) is not used. The hand strap helps you hold the housing with just one hand.
Equipped with two sacrificial zinc diodes (one on the front case and the second on the rear) to avoid electrolysis damage.