Sea & Sea

List  Grid
Show:
Sort By:
SEA & SEA ORING YS 010203/YSD1&D2
This Sea & Sea o-ring set is for the YS-01, YS-02, YS-90, YS-110, YS-110a YS-27, and YS-30 strobes. The o-ring resembling a thick rubber band is designed to establish a watertight seal when going underwater. Made of elastomeric material and manufactured to the precision tolerances required to hold a pressure seal on your housing, it provides the means by which a watertight seal is formed. ..
₱620.00
SEA & SEA SACRIFICIAL ZINC ANODE
Replacement/Spare sacrificial zinc anode for Sea&Sea housings. ..
₱1,350.00
SEA & SEA ZOOM GEAR FOR SONY 16-35
When the Sea & Sea FC Zoom Gear is used with the “ML-NX Conversion Ring 30 and Extension Ring with Focus Knob” on Sea & Sea Sony Mirrorless interchangeable-lens camera housings, the knob on the extension ring controls zooming. ..
₱10,200.00
SEA & SEA ERGO GRIP VER. 2
Ergonomic design allows you to hold the grips naturally and with ease. ..
₱4,700.00
SEA & SEA PORT CASE
Sea & Sea Port Carrying Case was designed to protect your dome ports from scratches, dust and dirt.   ..
₱2,150.00
SEA & SEA YS250 CAP
Battery cap cover for Sea & Sea YS-250 Pro strobe. ..
₱2,520.00
SEA & SEA ZOOM GEAR NIKON 16-35MM F4G
This zoom gear enables zooming for the Nikon AF-S NIKKOR 16-35mm f/4G ED VR lens via the housing's focus/zoom knob when used with Sea&Sea digital single lens reflex camera housings. * Zoom is controllable with the focus knob on the housing. (main-body) * Manual focus can be used, optional FC Focus Gear & Extension Ring 46. ..
₱10,300.00
SEA & SEA YS-D2 J STROBE
YS-D2 SPECIFICATIONS: - [Guide Number (ISO 100/m) (land)] : 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached) - [Beam Angle] : 80°x80°  (without Diffuser), 100°x100°(Diffuser 100), 120° x 120° (Diffuser 120) - [Batteries] : 4xAA A: 6V Ni-MH: 4.8V - [Number of Flashes *1] : A: 150 Ni-MH: 200 - [Recycle time (full) *2] : A: 3.0 sec. Ni-MH: 1.5 sec. - [Color temperatur..
₱30,800.00
SEA & SEA HOUSING FOR CANON MDX-5D MARKIV
Sea & Sea has released heir housing for the Canon 5D Mark IV DSLR camera. Sea & Sea has a long reputation for making great, innovative and ergonomic housings, and this camera / housing combo is sure to be very popular with Canon underwater photographers and videographers. The Canon 5D Mark IV features a 30.4 megapixel full-frame CMOS sensor and incorporates Canon's dual-pixel autofocus ..
₱152,000.00
SEA  & SEA BALL MOUNT SET
Used to mount two SA8 Fixed Ball Bases to the handle for use as a strobe arm. *Two SA8 Fixed Ball Bases will be mounted with one kit. ..
₱720.00
SEA & SEA  CARRY CLIP SET
Used to clip the handle to the housing for use as a carry handle. *Four rubber rings are included with this kit. These prevent the metal lanyard loops from contacting each other directly to reduce noise. ..
₱720.00
SEA & SEA BUOYANCY-ARM HANDLE
Sea & Sea designed a new multipurpose float that can be used as a buoyancy arm and or as a handle to carry your camera rig. Approximate lift: 300g TECH SPECS Construction: Polyethylene Depth Rating: 50m / 165ft. Service Temperature: 1-40 degrees Celsius / 32-104 degrees Fahrenheight Dimensions (WxHxD): 256 x 76 x 62mm / 10.1 x 3 x 2.4 inches Weight on Land: 210g / 7.4oz. Underwater..
₱1,050.00
SEA & SEA FOCUS GEAR FOR CANON EF16-35MM F2.8L III USM
Mounts onto Focus Ring of Lens Rotate Knob to Adjust Focus with Lens ..
₱10,260.00
SEA & SEA ZOOM GEAR FOR CANON EF16-35MM F2.8L III USM
Mounts onto Zoom Ring of Lens Rotate Knob to Zoom with Lens For Ports on MDX or RDX Camera Housings ..
₱10,500.00
SEA & SEA HOUSING FOR NIKON D850
Much lighter than previous housings.      Using unprecedented precision machining, the dimensions of the housing are similar to those of the camera. In addition, the revised internal design has also helped reduce weight. The MDX-D850 is approximately 11% (350g/12.3oz) lighter than the previous MDX-D810 housing. Various controls can be operated whilst holding the grips.  ..
₱187,500.00
Back to Top