Power ON/OFF, switching between TTL and manual, TTL and TTL exposure compensation (from +2 to - 2 with in 1/3 increments) are controlled from the housing.
Accessory connector (supplied with the converter) is fixed in the accessory port.
LED showing battery charge remaining is situated alongside the viewfinder on the rear of the housing.
4 mode strobe selection switches (for Left and Right..
The Optical YS Converter from Sea & Sea is an underwater photo accessory for TTL strobe syncing with the Nikon D7100 DSLR camera. This internal TTL converter connects to the camera's hot shoe and fits within the Sea & Sea MDX-D7100 underwater housing.
User replaceable 2-pin strobe connector and sync connecter set. The connector set can be fixed after removing cap for accessory port.
* The connector set is required to connect the YS series strobes via sync cord to SEA&SEA housings for digital SLR cameras which are equipped with accessory port as standard.
User replaceable 5-pin strobe connector and sync connector set. The connector set can be fixed after removing cap for accessory port.
* The connector set is required to connect the YS Converter / N to SEA&SEA housings for Nikon digital SLR cameras which are equipped with accessory port as standard.
The Sea & Sea RDX Rear Port Cover fits onto the back of ports compatible with the RDX-series underwater camera housings. Attach it when the port is not in use in order to keep out moisture.
Fits onto the back of ports compatible with the RDX-series underwater camera housings
Keeps out moisture when the port is not in use
Camera Quick Shoe for easy mounting and removal of the camera. Mounting the camera becomes a breeze. You need only to slide the camera quick shoe into the slot, up to the designated position. There is almost no need for complicated position and gear alignments so even beginners can easily mount a camera.
Two Fiber-optic cable sockets
By inserting the Fiber-optic Cable..