The D-2000 offers highly accurate S-TTL Auto mode by transmitting built-in flash light to an external strobe regardless of make or model of camera. The S-TTL Auto does not require any complicated setting. You do not have to buy new strobe when you upgrade from point & shoot digital camera to digital SLR camera.
The D-2000 offers semi-automatic 24 step External Auto mode with 1/4EV. increments..
INON -0.5 Blue Diffuser 2 (External Auto)
Item includes threaded W40 LE and Red LE filters for the focus light. 0.5 blue diffuser panel for External Auto Mode compatible strobes: Z-240, D-2000Wn, D-2000W, D-2000, D-180, D-180S when used with Canon digital cameras.
Diffuser corrects for camera's reddish-yellow hue, rendering more natural colors.
Includes Focus Light Filter Set (Blue/Red)..
Adding these filters on strobe enables to reduce color temperature of strobe light. Two different grade filters deliver strobe light at color temperature 4900K or 4600K from original 5500K and each grade filter has non-diffuse version at same power output and half stop diffused version which increases beam angle to 110 degree. These filters have been designed on totally new concept to control colo..
Inon -0.5 white diffuser:
This diffuser is standard with all Inon S2000 strobes. So please only buy this if you need to replace it.
Softens the strobe light by a tiny -0.5 stops.
Increases angle of coverage to 110 x 110 degrees with this strobes.
Includes: 1 x white -0.5 diffuser, English instructions.
Is suitable for use with the following Inon strobes:
The rubber bush which is packaged in Optical D Cable Type L Double Hole Rubber Bush Set. Available as standalone product for those who already have Optical D Cable.
"INON Double Hole Rubber Bush for Fiber Optics
One side is for Sea&Sea FO connection base and the other is for two FO cable connection."
Fiber optics products to connect the X-2 housing and compatible strobe via Double Optical D Connector. Four different length to choose; "Optical D Cable Type L" with free length approx. 43cm / 17in, "Optical D Cable L Type L" with free length approx. 68cm / 27in, "Optical D Cable SS Type L" with free length approx. 24cm / 9in, and "Optical D Cable LL Type L" with free length approx. 110cm / 43in.
Same fundamental features as D-2000 in ultra comact body
Guide Number 20.
Circular 110 degree beam coverage with a diffuser
Precise "S-TTL" mode & 12 step "Manual"
Built-in EV. Controller to fine-tune S-TTL Auto exposure
Next generation wireless TTL
Powerful 4 x AA batteries operation
Minimum recycle time of 1.5 seconds at full flash
Snoots can be used to:
block extra diffused light to eliminate backscatter
highlight a subject by illuminating only the subject
give a spotlight effect on a subject etc. Set contents:Rubber Hood 72, Rubber Hood Sleeve,Step up Ring,W40°Filter LE x 2 , Snoot Tube 10, Snoot Tube 26
The Rubber Hood is securely attached on a compatible strobe via supplied dedicated aluminum sleeve whi..
A strobe cover made from neoprene as same as wet-suits for underwater use. This cover protects strobe from accidental damage during diving as well as transportation by its cushioned material. Two slits on both sides are designed for effective radiation.
*Strobe not included
This flash trigger is manual only; automatic flash exposure (TTL) is not currently enabled - a tool for reliable, fast external flash firing. Supported strobes include the Inon Z-240 Type 4, D-2000 Type 4, S-2000, Sea & Sea YS-250*, YS-01**, and YS-D1**.